QT/QTE 编译安装问题与解决之道
来源:互联网 发布:java 动态添加属性 编辑:程序博客网 时间:2024/06/10 02:50
编译Qt/Embedded
编译过程出现错误:
错误一:
error: ‘QWSInputMethod’ has not been declared
修正方法:
cd $QTDIR/src/kernel //$DTDIR=/home/opiehome/qt-2.3.10
gedit qwindowsystem_qws.h
在前面增加以下两行
class QWSInputMethod;
class QWSGestureMethod;
错误二:
qvaluestack.h:57: 错误:不能从 ‘QValueListIterator<QString>’ 转换到 ‘const char*’,为实参 ‘1’(属于 ‘int remove(const char*)’)
修正方法:
gedit $QTDIR/include/qvaluestack.h &
将remove( this->fromLast() );改为this->remove( this->fromLast() );
在Build Qt2.3.2时make出现如下问题:
成功编译的方法:
configure时要使用以下语句:
Q2:在Build Qt/Embedded时make出现以下问题:
修正方法:
nfs mount时候出现的NFS崩溃,按照以下的方式mount
mount -t nfs -o intr,nolock,rsize=1024,wsize=1024 192.168.1.3/root/somedir /host
Q4:在测试时,“./progressbar -qws”后出现如Q3一样的提示 ,按Q3来处理。
编译过程出现错误:
错误一:
error: ‘QWSInputMethod’ has not been declared
修正方法:
cd $QTDIR/src/kernel //$DTDIR=/home/opiehome/qt-2.3.10
gedit qwindowsystem_qws.h
在前面增加以下两行
class QWSInputMethod;
class QWSGestureMethod;
错误二:
qvaluestack.h:57: 错误:不能从 ‘QValueListIterator<QString>’ 转换到 ‘const char*’,为实参 ‘1’(属于 ‘int remove(const char*)’)
修正方法:
gedit $QTDIR/include/qvaluestack.h &
将remove( this->fromLast() );改为this->remove( this->fromLast() );
在Build Qt2.3.2时make出现如下问题:
xml/qxml.h:214: 警告:‘class QXmlReader’ 有虚函数却没有虚析构函数
xml/qxml.h:402: 警告:‘class QXmlContentHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:419: 警告:‘class QXmlErrorHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:428: 警告:‘class QXmlDTDHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:436: 警告:‘class QXmlEntityResolver’ 有虚函数却没有虚析构函数
xml/qxml.h:443: 警告:‘class QXmlLexicalHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:456: 警告:‘class QXmlDeclHandler’ 有虚函数却没有虚析构函数
xml/qxml.cpp:1518: 警告:未使用的参数 ‘ret’
/qt/qtx11/include/qvaluestack.h: In member function ‘T QValueStack<T>::pop() [with T = QMap<QString, QString>]’:
xml/qxml.cpp:513: instantiated from here
/qt/qtx11/include/qvaluestack.h:57: 错误:不能从 ‘QValueListIterator<QMap<QString, QString> >’ 转换到 ‘const char*’,为实参 ‘1’(属于 ‘int remove(const char*)’)
/qt/qtx11/include/qvaluestack.h: In member function ‘T QValueStack<T>::pop() [with T = QString]’:
xml/qxml.cpp:2502: instantiated from here
/qt/qtx11/include/qvaluestack.h:57: 错误:不能从 ‘QValueListIterator<QString>’ 转换到 ‘const char*’,为实参 ‘1’(属于 ‘int remove(const char*)’)
make[2]: *** [xml/qxml.o] 错误 1
make[2]: Leaving directory `/qt/qtx11/src'
make[1]: *** [sub-src] 错误 2
make[1]: Leaving directory `/qt/qtx11'
make: *** [init] 错误 2
xml/qxml.h:402: 警告:‘class QXmlContentHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:419: 警告:‘class QXmlErrorHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:428: 警告:‘class QXmlDTDHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:436: 警告:‘class QXmlEntityResolver’ 有虚函数却没有虚析构函数
xml/qxml.h:443: 警告:‘class QXmlLexicalHandler’ 有虚函数却没有虚析构函数
xml/qxml.h:456: 警告:‘class QXmlDeclHandler’ 有虚函数却没有虚析构函数
xml/qxml.cpp:1518: 警告:未使用的参数 ‘ret’
/qt/qtx11/include/qvaluestack.h: In member function ‘T QValueStack<T>::pop() [with T = QMap<QString, QString>]’:
xml/qxml.cpp:513: instantiated from here
/qt/qtx11/include/qvaluestack.h:57: 错误:不能从 ‘QValueListIterator<QMap<QString, QString> >’ 转换到 ‘const char*’,为实参 ‘1’(属于 ‘int remove(const char*)’)
/qt/qtx11/include/qvaluestack.h: In member function ‘T QValueStack<T>::pop() [with T = QString]’:
xml/qxml.cpp:2502: instantiated from here
/qt/qtx11/include/qvaluestack.h:57: 错误:不能从 ‘QValueListIterator<QString>’ 转换到 ‘const char*’,为实参 ‘1’(属于 ‘int remove(const char*)’)
make[2]: *** [xml/qxml.o] 错误 1
make[2]: Leaving directory `/qt/qtx11/src'
make[1]: *** [sub-src] 错误 2
make[1]: Leaving directory `/qt/qtx11'
make: *** [init] 错误 2
成功编译的方法:
更改qt-2.3.2文件夹中src/tools/qvaluestack.h第57行源代码:
remove (this->formLast() );
为:this->remove (this->formLast() );
configure时要使用以下语句:
./configure -debug -no-opengl -no-xft
Q2:在Build Qt/Embedded时make出现以下问题:
error: ‘QWSInputMethod’ has not been declared
修正方法:
cd $QTDIR/src/kernel //$DTDIR=/home/opiehome/qt-2.3.10
gedit qwindowsystem_qws.h
gedit qwindowsystem_qws.h
在前面增加以下两行:
class QWSInputMethod;
class QWSGestureMethod;
Q3:使用nfs时在cp一些大点的文件时,出现NFS的错误:class QWSGestureMethod;
nfs: server *** not responding, still trying
修改方法:nfs mount时候出现的NFS崩溃,按照以下的方式mount
mount -t nfs -o intr,nolock,rsize=1024,wsize=1024 192.168.1.3/root/somedir /host
Q4:在测试时,“./progressbar -qws”后出现如Q3一样的提示 ,按Q3来处理。
- QT/QTE 编译安装问题与解决之道
- QT/QTE 编译安装问题与解决之道
- Qt/QTE 编译安装问题与解决方法
- Qt/QTE 编译安装问题与解决方法(2)
- Qt/QTE 编译安装问题与解决方法 (3)
- Qt/QTE 编译安装问题与解决方法收藏
- qt/qte qtopia编译问题集锦
- QT QTE Qtopia 安装问题集锦
- Qt第一印象——Qte与Qt
- Qt第一印象——Qte与Qt
- ubuntu安装QTE的问题
- QTE configure配置安装问题
- arm平台tslib的编译与qte源代码包配置中的-qt-mouse-tslib
- arm平台tslib的编译与qte源代码包配置中的-qt-mouse-tslib
- arm平台tslib的编译与Qte源代码包配置中的-qt-mouse-tslib
- arm平台tslib的编译与qte源代码包配置中的-qt-mouse-tslib--转载
- QT安装编译问题
- Qt--编译与安装
- CakePHP中的scriptaculous(1)
- BSD菜鸟装jdk
- 大连外语培训怪象:上万元吸引千名学员600元无人捧场
- 对代码变形的一点认识
- Microosft Windows Server 2008 Enerprise 界面概览(图集) + 侧边栏效果
- QT/QTE 编译安装问题与解决之道
- 职场小贴士“助燃”心灵的成熟
- INTEL 汇编指令集
- 同卵三胞胎出生概率两亿分之一
- [Thinking in C++]C02:Ex04 解答及疑惑
- 雷锋成网络游戏主角 要想升级需不断做好事
- 模型驱动软件开发实战步骤
- 学习Struts 2参考网站
- image与byte数组的转换