HDU 1115 Lifting the Stone(多边形重心)
来源:互联网 发布:网络硬盘录像机 编辑:程序博客网 时间:2024/06/10 04:43
Lifting the Stone
Time Limit: 2000/1000 MS (Java/Others) Memory Limit: 65536/32768 K (Java/Others)Total Submission(s): 6464 Accepted Submission(s): 2682
Problem Description
There are many secret openings in the floor which are covered by a big heavy stone. When the stone is lifted up, a special mechanism detects this and activates poisoned arrows that are shot near the opening. The only possibility is to lift the stone very slowly and carefully. The ACM team must connect a rope to the stone and then lift it using a pulley. Moreover, the stone must be lifted all at once; no side can rise before another. So it is very important to find the centre of gravity and connect the rope exactly to that point. The stone has a polygonal shape and its height is the same throughout the whole polygonal area. Your task is to find the centre of gravity for the given polygon.
Input
The input consists of T test cases. The number of them (T) is given on the first line of the input file. Each test case begins with a line containing a single integer N (3 <= N <= 1000000) indicating the number of points that form the polygon. This is followed by N lines, each containing two integers Xi and Yi (|Xi|, |Yi| <= 20000). These numbers are the coordinates of the i-th point. When we connect the points in the given order, we get a polygon. You may assume that the edges never touch each other (except the neighboring ones) and that they never cross. The area of the polygon is never zero, i.e. it cannot collapse into a single line.
Output
Print exactly one line for each test case. The line should contain exactly two numbers separated by one space. These numbers are the coordinates of the centre of gravity. Round the coordinates to the nearest number with exactly two digits after the decimal point (0.005 rounds up to 0.01). Note that the centre of gravity may be outside the polygon, if its shape is not convex. If there is such a case in the input data, print the centre anyway.
Sample Input
245 00 5-5 00 -541 111 111 111 11
Sample Output
0.00 0.006.00 6.00给出n个点,按顺序连接得到一个多边形,求该多边形的重心n个点的多边形可分成n-2个三角形三角形的重心为 (x1+x2+x3)/3,(y1+y2+y3)/3把三角形的重心分别*三角形面积,求和结果/多边形面积即是最后结果#include <iostream>#include <cstdio>#include <cstring>#include <stdlib.h>#include <algorithm>#include <queue>#include <map>#include <cmath>#define N 1000001#define eps 1e-6#define PI acos(-1.0)#define inf 0x3f3f3f3fusing namespace std;struct Point{ double x, y;}p[N];double cross(Point a, Point b){ return a.x*b.y - a.y*b.x;}Point Interity(int n){ Point ans; ans.x = 0; ans.y = 0; p[n].x = p[0].x; p[n].y = p[0].y; double area = 0; for(int i = 0; i < n; i++) { double t = cross(p[i], p[i+1]); ans.x += t * (p[i].x + p[i+1].x); ans.y += t * (p[i].y + p[i+1].y); area += t; } ans.x /= 3*area; ans.y /= 3*area; return ans;}int main(){ int T; scanf("%d", &T); while(T--) { int n; scanf("%d", &n); for(int i = 0; i < n; i++) scanf("%lf%lf", &p[i].x, &p[i].y); Point ans = Interity(n); printf("%.2lf %.2lf\n", ans.x, ans.y); } return 0;}
0 0
- HDU 1115 Lifting the Stone(多边形重心)
- 【多边形重心】hdu 1115 Lifting the Stone
- HDU 1115 Lifting the Stone(多边形重心)
- hdu 1115 Lifting the Stone【多边形重心】
- hdu 1115 Lifting the Stone【多边形重心】
- HDU 1115 Lifting the Stone (多边形重心)
- hdu 1115 Lifting the Stone 密度均匀多边形重心
- HDU 1115 Lifting the Stone(求多边形重心)
- hdu 1115 Lifting the Stone 多边形的重心
- HDU 1115 Lifting the Stone 多边形重心 模板体
- HDU 1115 Lifting the Stone(求多边形重心)
- HDU-#1115 Lifting the Stone(多边形重心)
- HDU 1115 Lifting the Stone 多边形的重心
- hdu 1115 Lifting the Stone(求取多边形的重心)
- HDU 1115 Lifting the Stone (求多边形的重心)
- hdu 1115 Lifting the Stone【求多边形重心】
- hdu acm 1115 Lifting the Stone(多边形重心)
- hdu-1115 Lifting the Stone(求多边形的重心)
- 搭建zoneminder筆記
- vs2015 "行号显示"设置(vs简单使用)
- C++中指针使用小结
- 使用crontab命令定时执行脚本
- 软件公司主要防泄密点
- HDU 1115 Lifting the Stone(多边形重心)
- LeetCode OJ 之 Number of Digit One (数字1的个数)
- Java使用限流处理大量的并发请求
- java数据结构学习笔记(一)综述
- eclipse去除所有调试断点
- Java 如何对文件进行多个Object对象流的读写操作
- 黑马程序员-Java概述
- 【十四】继承与多态(上)
- 设计模式——单例Singleton