opencv 人脸识别 （二）训练和识别

上一篇中我们对训练数据做了一些预处理，检测出人脸并保存在\pic\color\x文件夹下（x=1,2,3,...类别号），本文做训练和识别。为了识别，首先将人脸训练数据 转为灰度、对齐、归一化，再放入分类器（EigenFaceRecognizer）,最后用训练出的model进行predict。

-----------------------------------------

环境：vs2010+opencv 2.4.6.0

特征：eigenface

Input：一个人脸数据库，15个人，每人20个样本（左右）。

Output：人脸检测，并识别出每张检测到的人脸。

-----------------------------------------

1. 为训练数据预处理（ 转为灰度、对齐、归一化 ）

• 转为灰度和对齐是后面做训练时EigenFaceRecognizer的要求；
• 归一化是防止光照带来的影响

在上一篇的 2.2 Prehelper.cpp文件中加入函数

void resizeandtogray(char* dir,int k, vector<Mat> &images, vector<int> &labels,
vector<Mat> &testimages, vector<int> &testlabels);

void resizeandtogray(char* dir,int K, vector<Mat> &images, vector<int> &labels,vector<Mat> &testimages, vector<int> &testlabels){IplImage* standard = cvLoadImage("D:\\privacy\\picture\\photo\\2.jpg",CV_LOAD_IMAGE_GRAYSCALE);string cur_dir;char id[5];int i,j;for(int i=1; i<=K; i++){cur_dir = dir;cur_dir.append("gray\\");_itoa(i,id,10);cur_dir.append(id);const char* dd = cur_dir.c_str();CStatDir statdir;if (!statdir.SetInitDir(dd)){puts("Dir not exist");return;}cout<<"Processing samples in Class "<<i<<endl;vector<char*>file_vec = statdir.BeginBrowseFilenames("*.*");for (j=0;j<file_vec.size();j++){IplImage* cur_img = cvLoadImage(file_vec[j],CV_LOAD_IMAGE_GRAYSCALE);cvResize(cur_img,standard,CV_INTER_AREA);Mat cur_mat = cvarrToMat(standard,true),des_mat;cv::normalize(cur_mat,des_mat,0, 255, NORM_MINMAX, CV_8UC1);cvSaveImage(file_vec[j],cvCloneImage(&(IplImage) des_mat));if(j!=file_vec.size()){images.push_back(des_mat);labels.push_back(i);}else{testimages.push_back(des_mat);testlabels.push_back(i);}}cout<<file_vec.size()<<" images."<<endl;}}

并在main中调用：

int main( ){CvCapture* capture = 0;Mat frame, frameCopy, image;string inputName;int mode;char dir[256] = "D:\\Courses\\CV\\Face_recognition\\pic\\"; //preprocess_trainingdata(dir,K); //face_detection and extract to filevector<Mat> images,testimages;vector<int> labels,testlabels;resizeandtogray(dir,K,images,labels,testimages,testlabels); //togray, normalize and resizesystem("pause");return 0;}

2. 训练

有了vector<Mat> images,testimages;vector<int> labels,testlabels; 可以开始训练了，我们采用EigenFaceRecognizer建模。

在Prehelper.cpp中加入函数

Ptr<FaceRecognizer> Recognition(vector<Mat> images, vector<int> labels,vector<Mat> testimages, vector<int> testlabels)；

Ptr<FaceRecognizer> Recognition(vector<Mat> images, vector<int> labels,vector<Mat> testimages, vector<int> testlabels){Ptr<FaceRecognizer> model = createEigenFaceRecognizer(10);//10 Principal componentscout<<"train"<<endl;model->train(images,labels);int i,acc=0,predict_l;for (i=0;i<testimages.size();i++){predict_l = model->predict(testimages[i]);if(predict_l != testlabels[i]){cout<<"An error in recognition: sample "<<i+1<<", predict "<<predict_l<<", groundtruth "<<testlabels[i]<<endl;imshow("error 1",testimages[i]);waitKey();}elseacc++;}cout<<"Recognition Rate: "<<acc*1.0/testimages.size()<<endl;return model;}

Recognization()输出分错的样本和正确率，最后返回建模结果Ptr<FaceRecognizer> model

主函数改为：

int main( ){CvCapture* capture = 0;Mat frame, frameCopy, image;string inputName;int mode;char dir[256] = "D:\\Courses\\CV\\Face_recognition\\pic\\"; //preprocess_trainingdata(dir,K); //face_detection and extract to filevector<Mat> images,testimages;vector<int> labels,testlabels;//togray, normalize and resize; load to images,labels,testimages,testlabelsresizeandtogray(dir,K,images,labels,testimages,testlabels); //recognitionPtr<FaceRecognizer> model = Recognition(images,labels,testimages,testlabels);char* dirmodel = new char [256];strcpy(dirmodel,dir); strcat(dirmodel,"model.out");FILE* f = fopen(dirmodel,"w");fwrite(model,sizeof(model),1,f);system("pause");return 0;}

最终结果：一个错分样本，正确率93.3%

文章所用代码打包链接：http://download.csdn.net/detail/abcjennifer/7047853

关于Computer Vision更多的学习资料将继续更新，敬请关注本博客和新浪微博Rachel Zhang。