红旗linux启动报Kernel panic - not syncing Attempted to kill init的处理
来源:互联网 发布:爱飞车抽奖软件 编辑:程序博客网 时间:2024/06/10 09:48
我有台红旗linux5.0 SP2的HP DL580 G7的服务器在启动的时候报如上错误,现将处理方法记录如下。
首先用linux5.0 SP2系统盘启动系统,进入救援模式。方法如下: 1、在boot出输入:linux rescue
2、加载设备驱动。完成后,不再加载其他驱动 3、选择语言类型和键盘类型
4、是否需要网络连接是选择”否“ 5选择continue挂载分区
6、在#号后面执行chroot /mnt/sysimage回车 如果在执行最后命令的时候报没有分区,那就是分区没有挂载上,说明我们的根目录已经被破坏了,要做根分区文件的恢复。用fdisk -l查看分区信息,应该可以看见机器上所以的分区。这时可以将根分区做备份,利用mount命令将各个分区分别挂载上,具体方法如下:
在/mnt目录下创建价格目录,mkdir A,用mount /dev/c0d0p1 /mnt/A就将boot分区挂载到各个创建的A目录。
我的服务器挂载上分区后发现很多的文件都是乱码,不如在etc下的passwd文件等等都已经被破坏,这样的处理方法是,找台系统版本号以及位数一样的服务器(用这个命令看系统版本号uname -a)将正常服务器根上的usr etc lib sbin目录全部打包备份。这时重启故障服务器进入救援模式,配置网络。将打包的文件用ftp传到故障服务器,备份故障服务器上的根目录。将tar包用tar xvf file.tar打开,重启服务器,如果有报错在根据相应的错误进行处理,启动正常后修改网络配置和建立相应的用户名,现在故障服务器上的网络配置、用户名等都是正常服务器上的。
这样故障应该解决
- 红旗linux启动报Kernel panic - not syncing Attempted to kill init的处理
- Linux裁剪 Kernel panic - not syncing : Attempted to kill init!
- Kernel Panic -- not syncing: attempted to kill init的解决
- 启动文件系统Kernel panic - not syncing: Attempted to kill init! 报错
- Kernel panic - not syncing: Attempted to kill init(linux内核启动错误-arm)
- linux 内核启动错误和selinux参数 Kernel panic -not syncing:Attempted to kill init
- Kernel panic - not syncing: Attempted to kill init(linux内核启动错误-arm)
- Kernel panic - not syncing: Attempted to kill init(linux内核启动错误-arm)
- Linux启动提示Kernel panic - not syncing: Attempted to kill init解决办法
- Linux启动提示Kernel panic - not syncing: Attempted to kill init解决办法
- Kernel panic - not syncing: Attempted to kill init!
- Kernel panic - not syncing: Attempted to kill init!问题解决办法
- Kernel panic - not syncing: Attempted to kill init!
- Kernel panic - not syncing: Attempted to kill init
- Kernel panic - not syncing: Attempted to kill init!
- Kernel panic - not syncing: Attempted to kill init!
- Kernel panic - not syncing: Attempted to kill init!
- yaffs2 文件系统:Kernel panic - not syncing: Attempted to kill init!
- scrollTo、scrollBy、getScrollX、getScrollY这4个方法的含义
- BitmapData复制DisplayObject
- git学习------>"Agent admitted failure to sign using the key." 问题解决方法
- mybatis+spring3实战1-数据映射器 mapper方式
- 复杂TableView在iOS上的性能优化
- 红旗linux启动报Kernel panic - not syncing Attempted to kill init的处理
- 学.Net培训课程就去广州传智播客
- 为ffmpeg编译libaacplus-2.0.2
- Java通过SSH2协议执行远程Shell脚本
- 设计模式-单例模式(singleton)
- UC技术博客
- ORACLE PROC开发
- 番禺人才网今日起正式上线!
- Index 概论