从NFS启动TQ2440
来源:互联网 发布:淘宝拍卖海关真的吗 编辑:程序博客网 时间:2024/05/20 00:39
准备:首先在你的linux上确定nfs挂载没问题,然后设置好你要挂载nfs的目录,我的设置如下:
vi /etc/exports 设置如下
/opt/EmbedSky/root_nfs *(rw,sync,no_root_squash)
其次,你要把TQ2440制作的根文件系统root_qtopia_2.2.0_2.6.30.4_20100601.tar.bz2解压到root_nfs目录下(如果高手的话,自己制作根目录也行)。
TQ2440制作的根文件系统要修改一个地方,
修改文件系统/etc/init.d/rcS
#net_set & //注释掉
如果在“dev/”目录下的“console”和“null”就不存在了,还需要重新建立,命令如下;
mknod console c 5 1
mknod null c 1 3
1.OK,接下来要弄开发板了,首先连接好开发板,接上电源,然后把开发板拨到nfs启动。通过超级终端可以看到下面内容:
##### EmbedSky BIOS for SKY2440/TQ2440 #####
Press Space key to Download Mode !
##### Boot for Nor Flash Main Menu #####
##### EmbedSky USB download mode #####
[1] Download u-boot or STEPLDR.nb1 or other bootloader to Nand Flash
[2] Download Eboot (eboot.nb0) to Nand Flash
[3] Download Linux Kernel (zImage.bin) to Nand Flash
[5] Download CRAMFS image to Nand Flash
[6] Download YAFFS image (root.bin) to Nand Flash
[7] Download Program (uCOS-II or TQ2440_Test) to SDRAM and Run it
[8] Boot the system
[9] Format the Nand Flash
[0] Set the boot parameters
[a] Download User Program (eg: uCOS-II or TQ2440_Test)
[b] Download LOGO Picture (.bin) to Nand Flash
[l] Set LCD Parameters
[n] Enter TFTP download mode menu
[o] Download u-boot to Nor Flash
[r] Reboot u-boot
[t] Test Linux Image (zImage)
[q] quit from menu
Enter your selection:
2.接着我们选择0,设置启动参数。按0选项后,进入如下:
##### Parameter Menu #####
[1] Set NFS boot parameter
[2] Set Yaffs boot parameter
[3] Set parameter
[4] View the parameters
[d] Delete parameter
[s] Save the parameters to Nand Flash
[q] Return main Menu
Enter your selection:
我们选1,进入NFS参数设置。
设置内容如下:
Enter your selection: 1
Enter the PC IP address:(xxx.xxx.xxx.xxx)
192.168.1.133 //你的linux上的IP
Enter the SKY2440/TQ2440 IP address:(xxx.xxx.xxx.xxx)
192.168.1.6 //你的开发板IP
Enter the Mask IP address:(xxx.xxx.xxx.xxx)
255.255.255.0 //子网掩码
Enter NFS directory:(eg: /opt/EmbedSky/root_nfs)
/opt/EmbedSky/root_nfs //你的linux上设置的nfs挂载目录
然手确定,选s保存,然后再选q退出。接着按8启动系统。呵呵,接着你就可以看到系统进入一个你熟悉的界面了。
-------------------------
注意问题:1.首先要确定能ping的通;2.确定nfs有启动;3.确定nfs挂载的目录没写错。
- 从NFS启动TQ2440
- 从NFS启动TQ2440
- TQ2440从nfs网络文件系统启动
- TQ2440 tftp+nfs 无flash启动
- 从NFS启动Linux
- 从NFS启动linux
- 从NFS启动linux
- 从NFS启动Linux
- AT91SAM9X35-EK 从NFS启动
- 关于vmware+tq2440+nfs
- TQ2440挂载NFS
- tq2440挂载nfs文件系统
- TQ2440从nor烧写nand启动uboot和kennel
- TQ2440利用nfs挂载文件系统不稳定,启动成功后,总是一会时间就重启
- OK6410开发板:挂载NFS、从NFS启动:
- E9 搭建 NFS 环境并从 NFS 启动开发板
- 搭建NFS环境并从NFS启动开发板
- 如何从NFS启动Linux及原理
- 基于mini2440的led驱动编写的总结
- expdp network_link参数
- 黑马程序员-android视频播放器
- HttpURLConnection用法详解
- java中double四舍五入并设置小数点位数的问题
- 从NFS启动TQ2440
- java同步和互斥的应用:生产者消费者之爸爸妈妈儿子女儿苹果橘子编程实现
- 第十六周任务一
- Dom获取body元素出现null的问题
- 根据DataRow获取列名
- test
- 浅谈ANR及log分析ANR
- Linux内核的等待队列
- STM32中断中设置的先占式优先级与从优先级(转)