/* (程序头部注释开始) * 程序的版权和版本声明部分 * Copyright (c) 2011, 烟台大学计算机学院学生 * All rights reserved.* 文件名称:派生类的继承* 作 者: 苗影* 完成日期:2012 年5月 9日 * 版 本 号: vc.1 * 对任务及求解方法的描述部分 :开摩托车* 输入描述: * 问题描述: * 程序输出: *程序头部的注释结束 */ #include <iostream>#include<conio.h>#include <windows.h>using namespace std;enum vehicleStaus {rest, running}; //车辆状态:泊车、行进class vehicle //车辆类{protected:int maxSpeed;//最大车速int currentSpeed;//当前速度int weight;//车重vehicleStaus status; //rest-泊车状态;running-行进状态public:vehicle(int maxS, int w); //构造函数,初始时,当前速度总为0且处在停车状态void start(); //由rest状态到running, 初速为1void stop(); //由running状态到rest, 当前速度小于5时,才允许停车void speed_up(); //加速,调用1次,速度加1void slow_down(); //减速,调用1次,速度减1,速度为0时,停车}; vehicle::vehicle(int maxS, int w){ maxSpeed=maxS; weight=w; currentSpeed=0; status=rest;}//启动:由rest状态到running, 初速为1 void vehicle::start() { if (status==rest) { status=running; currentSpeed=1; } else cout<<"车辆已经行驶!"<<endl; } //由running状态到rest, 当前速度小于5时,才允许停车 void vehicle::stop() { if (status==running) if(currentSpeed<5) { status=rest; currentSpeed=0; } else cout<<"车速太快!先减速再停车……"<<endl; else cout<<"车辆未启动!"<<endl; } void vehicle::speed_up(){ if (status==running) if(currentSpeed<maxSpeed) currentSpeed=currentSpeed+1; else cout<<"请不要超速行驶……"<<endl; else cout<<"车辆未启动!"<<endl; } //减速,调用1次,速度减1,速度为0时,停车 void vehicle::slow_down() { if (status==running) { if(currentSpeed>0) currentSpeed=currentSpeed-1; } else cout<<"车辆未启动!"<<endl; if(currentSpeed==0) status=rest; } class bicycle :virtual public vehicle//自行车类的虚基类为车辆类{ protected:double height; public:bicycle(int maxS=10, int w=50, int h=0.7); };bicycle::bicycle(int maxS, int w, int h):vehicle(maxS, w),height(h){} class motorcar : virtual public vehicle//机动车类的虚基类也为车辆类{ protected:int seatNum;int passengerNum; public:motorcar(int maxS=150, int w=1500, int s=5, int p=1); //定义构造函数void addPassenger(int p=1); //搭载乘客,超员要拒载,有人下车时,p为负数。当然车上乘客至少有1个(司机)。上下车时要保证安全……};class motorcycle: public bicycle ,public motorcar //摩托车类的基类为自行车类和机动车类{public:motorcycle(int maxS=90, int w=100, int s=3, int p=1, int h=0.7) : vehicle(maxS, w), bicycle(maxS, w, h), motorcar(maxS, w, s, p){} void show(); };motorcar::motorcar(int maxS, int w, int s, int p): vehicle(maxS, w),seatNum(s),passengerNum(p){} void motorcar::addPassenger(int a) //上车函数{ if (status==running) { cout<<"车辆正在行驶,停车后再上下车!"<<endl; } else { passengerNum+=a; if(passengerNum>seatNum) { passengerNum=seatNum; cout<<"涉嫌超员,已清理后达到满员!"<<endl; } else if (passengerNum<1) { passengerNum=1; cout<<"请司机不要离开岗位!"<<endl; } } } void motorcycle :: show() //显示摩托车的运行状态 { cout << "状态:" ; if(status)cout << "行进"; else cout << "泊车"; cout << " " << "车速:" << currentSpeed << "/" << maxSpeed << " " << "当前乘员:" << passengerNum << "/" << seatNum << endl; } int main( ){motorcycle m;bool end=false;while (!end){cout<<"请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束"<<endl;char keydown= _getch(); //_getch()返回键盘上读取的字符,应包含头文件<conio.h>switch(keydown){case '1': cout<<"操作(启动)\t"; m.start(); break;case '2': cout<<"操作(加速)\t"; m.speed_up(); break;case '3': cout<<"操作(减速)\t"; m.slow_down(); break;case '4': cout<<"操作(有人上车)\t"; m.addPassenger(); break;case '5': cout<<"操作(有人下车)\t"; m.addPassenger(-1); break;case '6': cout<<"操作(停车)\t"; m.stop(); break;case '0': end=true; break;}m.show();cout<<endl;Sleep(200); //要包含头文件<windows.h>}system("pause");return 0;}
请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(启动) 状态:行进; 车速:1 / 90 当前乘员:1 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(加速) 状态:行进; 车速:2 / 90 当前乘员:1 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(减速) 状态:行进; 车速:1 / 90 当前乘员:1 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(停车) 状态:泊车; 车速:0 / 90 当前乘员:1 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(有人上车) 状态:泊车; 车速:0 / 90 当前乘员:2 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(有人上车) 状态:泊车; 车速:0 / 90 当前乘员:3 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(启动) 状态:行进; 车速:1 / 90 当前乘员:3 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(加速) 状态:行进; 车速:2 / 90 当前乘员:3 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(有人上车) 车辆正在行驶,请停车后再上车!状态:行进; 车速:2 / 90 当前乘员:3 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(停车) 状态:泊车; 车速:0 / 90 当前乘员:3 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(有人下车) 状态:泊车; 车速:0 / 90 当前乘员:2 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(停车) 车辆未启动!状态:泊车; 车速:0 / 90 当前乘员:2 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束操作(有人下车) 状态:泊车; 车速:0 / 90 当前乘员:1 / 3请操作:1-启动 2-加速 3-减速 4-有人上车 5-有人下车 6-停车 0-结束经验积累:
速度加一时也要先判断是不是在开车,其实都要先判断车的状态,开始时忘了