c#中通过值和引用传递参数(downmoon)
来源:互联网 发布:文本相似性算法 编辑:程序博客网 时间:2024/06/11 21:04
c#中通过值和引用传递参数(downmoon)
在 C# 中,既可以通过值也可以通过引用传递参数。通过引用传递参数允许函数成员(方法、属性、索引器、运算符和构造函数)更改参数的值,并保持该更改。若要通过引用传递参数,请使用ref 或 out 关键字。为简单起见,本主题的示例中只使用了 ref 关键字。有关 ref 和 out 之间的差异的信息,请参见、使用 ref 和 out 传递数组。
本主题包括下列章节:
- 传递值类型参数
- 传递引用类型参数
它还包括以下示例:
传递值类型参数
值类型变量直接包含其数据,这与引用类型变量不同,后者包含对其数据的引用。因此,向方法传递值类型变量意味着向方法传递变量的一个副本。方法内发生的对参数的更改对该变量中存储的原始数据无任何影响。如果希望所调用的方法更改参数值,必须使用ref 或 out 关键字通过引用传递该参数。为了简单起见,以下示例使用 ref。
示例 1:通过值传递值类型
下面的示例演示通过值传递值类型参数。通过值将变量 myInt
传递给方法 SquareIt
。方法内发生的任何更改对变量的原始值无任何影响。
// PassingParams1.cs using System;class PassingValByVal{ static void SquareIt(int x) // The parameter x is passed by value. // Changes to x will not affect the original value of myInt. { x *= x; Console.WriteLine("The value inside the method: ", x); } public static void Main() { int myInt = 5; Console.WriteLine("The value before calling the method: ", myInt); SquareIt(myInt); // Passing myInt by value. Console.WriteLine("The value after calling the method: ", myInt); }}
输出
The value before calling the method: 5The value inside the method: 25The value after calling the method: 5
代码讨论
变量 myInt
为值类型,包含其数据(值 5
)。当调用 SquareIt
时,myInt
的内容被复制到参数 x
中,在方法内将该参数求平方。但在 Main 中,myInt
的值在调用SquareIt
方法之前和之后是相同的。实际上,方法内发生的更改只影响局部变量 x
。
示例 2:通过引用传递值类型
下面的示例除使用 ref 关键字传递参数以外,其余与“示例 1”相同。参数的值在调用方法后发生更改。
// PassingParams2.cs using System;class PassingValByRef{ static void SquareIt(ref int x) // The parameter x is passed by reference. // Changes to x will affect the original value of myInt. { x *= x; Console.WriteLine("The value inside the method: ", x); } public static void Main() { int myInt = 5; Console.WriteLine("The value before calling the method: ", myInt); SquareIt(ref myInt); // Passing myInt by reference. Console.WriteLine("The value after calling the method: ", myInt); }}
输出
The value before calling the method: 5The value inside the method: 25The value after calling the method: 25
代码讨论
本示例中,传递的不是 myInt
的值,而是对 myInt
的引用。参数x
不是 int 类型,它是对 int 的引用(本例中为对myInt
的引用)。因此,当在方法内对 x
求平方时,实际被求平方的是x
所引用的项:myInt
。
示例 3:交换值类型
更改所传递参数的值的常见示例是 Swap
方法,在该方法中传递 x
和y
两个变量,然后使方法交换它们的内容。必须通过引用向 Swap
方法传递参数;否则,方法内所处理的将是参数的本地副本。以下是使用引用参数的Swap
方法的示例:
static void SwapByRef(ref int x, ref int y){ int temp = x; x = y; y = temp;}
调用该方法时,请在调用中使用 ref 关键字,如下所示:
SwapByRef (ref i, ref j);
传递引用类型参数
引用类型的变量不直接包含其数据;它包含的是对其数据的引用。当通过值传递引用类型的参数时,有可能更改引用所指向的数据,如某类成员的值。但是无法更改引用本身的值;也就是说,不能使用相同的引用为新类分配内存并使之在块外保持。若要这样做,请使用ref(或 out)关键字传递参数。为了简单起见,以下示例使用 ref。
示例 4:通过值传递引用类型
下面的示例演示通过值向 Change
方法传递引用类型的参数 myArray
。由于该参数是对myArray
的引用,所以有可能更改数组元素的值。但是,试图将参数重新分配到不同的内存位置时,该操作仅在方法内有效,并不影响原始变量myArray
。
// PassingParams4.cs // Passing an array to a method without the ref keyword.// Compare the results to those of Example 5.using System;class PassingRefByVal { static void Change(int[] arr) { arr[0]=888; // This change affects the original element. arr = new int[5] {-3, -1, -2, -3, -4}; // This change is local. Console.WriteLine("Inside the method, the first element is: ", arr[0]); } public static void Main() { int[] myArray = ; Console.WriteLine("Inside Main, before calling the method, the first element is: ", myArray [0]); Change(myArray); Console.WriteLine("Inside Main, after calling the method, the first element is: ", myArray [0]); }}
输出
Inside Main, before calling the method, the first element is: 1Inside the method, the first element is: -3Inside Main, after calling the method, the first element is: 888
代码讨论
在上个示例中,数组 myArray
为引用类型,在未使用 ref 参数的情况下传递给方法。在此情况下,将向方法传递指向myArray
的引用的一个副本。输出显示方法有可能更改数组元素的内容(从 1
改为888
)。但是,在 Change
方法内使用 new 运算符分配新的内存部分,将使变量arr
引用新的数组。因此,这之后的任何更改都不会影响原始数组 myArray
(它是在Main
内创建的)。实际上,本示例中创建了两个数组,一个在 Main
内,一个在Change
方法内。
示例 5:通过引用传递引用类型
本示例除在方法头和调用中使用 ref 关键字以外,其余与“示例 4”相同。方法内发生的任何更改都会影响调用程序中的原始变量。
// PassingParams5.cs // Passing an array to a method with the ref keyword.// Compare the results to those of Example 4.using System;class PassingRefByRef { static void Change(ref int[] arr) { // Both of the following changes will affect the original variables: arr[0]=888; arr = new int[5] {-3, -1, -2, -3, -4}; Console.WriteLine("Inside the method, the first element is: ", arr[0]); } public static void Main() { int[] myArray = ; Console.WriteLine("Inside Main, before calling the method, the first element is: ", myArray [0]); Change(ref myArray); Console.WriteLine("Inside Main, after calling the method, the first element is: ", myArray [0]); }}
输出
Inside Main, before calling the method, the first element is: 1Inside the method, the first element is: -3Inside Main, after calling the method, the first element is: -3
代码讨论
方法内发生的所有更改都影响 Main 中的原始数组。实际上,使用 new 运算符对原始数组进行了重新分配。因此,调用 Change
方法后,对 myArray
的任何引用都将指向 Change
方法中创建的五个元素的数组。
示例 6:交换两个字符串
交换字符串是通过引用传递引用类型参数的很好的示例。本示例中,str1
和 str2
两个字符串在 Main 中初始化,并作为由 ref 关键字修饰的参数传递给 SwapStrings
方法。这两个字符串在该方法内以及 Main 内均进行交换。
// PassingParams6.csusing System;class SwappinStrings{ static void SwapStrings(ref string s1, ref string s2) // The string parameter x is passed by reference. // Any changes on parameters will affect the original variables. { string temp = s1; s1 = s2; s2 = temp; Console.WriteLine("Inside the method: , ", s1, s2); } public static void Main() { string str1 = "John"; string str2 = "Smith"; Console.WriteLine("Inside Main, before swapping: ", str1, str2); SwapStrings(ref str1, ref str2); // Passing strings by reference Console.WriteLine("Inside Main, after swapping: , ", str1, str2); }}
输出
Inside Main, before swapping: John SmithInside the method: Smith, JohnInside Main, after swapping: Smith, John
代码讨论
本示例中,需要通过引用传递参数以影响调用程序中的变量。如果同时从方法头和方法调用中移除 ref 关键字,则调用程序中不会发生任何更改。
- c#中通过值和引用传递参数(downmoon)
- c#中通过值和引用传递参数(downmoon)
- c#中通过值和引用传递参数
- c#中通过值和引用传递参数
- c#中通过值和引用传递参数
- C#中通过值和引用传递参数
- c#中通过值和引用传递参数
- c#中通过值和引用传递参数(总结)
- c#中通过值和引用传递参数
- 黑马程序员-通过“值”和通过“引用”传递引用参数
- C#参数传递:值传递和引用传递
- C#中方法参数的引用传递、值传递。
- JAVA中参数传递(按值传递和引用传递)
- js 中参数传递(值传递和引用传递)
- 通过值传递参数和通过引用传递参数之间的差异 (Visual Basic)
- JavaScript中函数参数的值传递和引用传递
- JavaScript中函数参数的值传递和引用传递
- JavaScript中函数参数的值传递和引用传递
- 使用Eclipse工具 签名【android开发】
- socket实现大型文件传输 .
- c#学习体会:使用 ref 和 out 传递数组(downmoon)
- JavaMail附件中文名称乱码
- svn常用方法,自己研究了3天的结果,希望给各位提供便利
- c#中通过值和引用传递参数(downmoon)
- Mysql 事务
- Paramete/Attribute的区别
- iPhone中TableViewCell自动换行的实现
- Java集合框架——HashMap与Hashtable
- mysql_fetch_assoc()和mysql_fetch_array()以及mysql_fetch_row()、mysql_fetch_object()的区别
- AJAX上传图片,使用ajaxupload
- sbc2410-nfs(用网络文件系统作为/文件系统)
- rsa