uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(75)：Milestone：内核成功启动

快乐虾

http://blog.csdn.net/lights_joy/

[e-mail]

  

本文适用于

ADI bf561 DSP

优视BF561EVB开发板

uclinux-2008r1.5-rc3(smp patch)

Visual DSP++ 5.0(update 5)

 

欢迎转载，但请保留作者信息

 

终于成功编译了第一个版本，庆祝一下：

Linux version 2.6.22.19-ADI-2008R1.5-svn ([e-mail]) (gcc version 4.1.2 (ADI svn)) #4 SMP Sat Jan 10

 

22:24:10 CST 2009

Hardware Trace Active and Enabled

Warning: limiting memory to 60MB due to hardware anomaly 05000263

Reset caused by Software reset

Blackfin support (C) 2004-2007 Analog Devices, Inc.

Compiled for ADSP-BF561 Rev 0.3

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 594 MHz core clock and 99 MHz System Clock

Board Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

  text      = 0x00010000-0x000dac86

  rodata    = 0x00140000-0x00160050

  data      = 0x00170000-0x0017ae90

    stack   = 0x00170000-0x00172000

  init      = 0x00180000-0x006f0000

  bss       = 0x006f0000-0x006fc0cc

  available = 0x006fc0cc-0x03bff000

  DMA Zone  = 0x03f00000-0x04000000

NOMPU: setting up cplb tables for global access

NOMPU: setting up cplb tables for global access

Instruction Cache Enabled for CPU0

Data Cache Enabled for CPU0

Built 1 zonelists.  Total pages: 15240

Kernel command line: console=ttyBF0,57600 root=/dev/mtdblock0 rw

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 256 (order: 8, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory available: 53716k/65536k RAM, (5568k init code, 811k kernel code, 709k data, 1024k dma, 3708k reserved)

Blackfin Scratchpad data SRAM: 4 KB

PDA for CPU0 reserved at ffb00000

Blackfin DATA_A SRAM: 16 KB

Blackfin DATA_B SRAM: 16 KB

Blackfin Instruction SRAM: 16 KB

Mount-cache hash table entries: 512

CoreB bootstrap code to SRAM ff600000 via DMA.

Booting Core B.

Instruction Cache Enabled for CPU1

Data Cache Enabled for CPU1

PDA for CPU1 reserved at ff700000

Brought up 2 CPUs

SMP: Total of 2 processors activated (1175.55 BogoMIPS).

could not vmalloc 20971520 bytes for cache!

migration_cost=1000

Blackfin DMA Controller

ezkit_init(): registering device resources

Serial: Blackfin serial driver

bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 35) is a BFIN-UART

Freeing unused kernel memory: 5568k freed

dma_alloc_init: dma_page @ 0x006eb000 - 256 pages at 0x03f00000

/dev/null: cannot create

/dev/null: cannot create

No usable address families found.

socket: Function not implemented

Unable to create socket

Unable to create socket

Unable to create socket

                           _____________________________________

        a8888b.           / Welcome to the uClinux distribution /

       d888888b.         /       _     _                         /

       8P"YP"Y88        /       | |   |_|            __  __ (TM)  |

       8|o||o|88  _____/        | |    _ ____  _   _ / // /       |

       8'    .88       /        | |   | |  _ /| | | | /  /        |

       8`._.' Y8.       /       | |__ | | | | | |_| | /  /        |

      d/      `8b.       /      /____||_|_| |_|/____|/_//_/       |

     dP   .    Y8b.       /   For embedded processors including   |

    d8:'  "  `::88b        /    the Analog Devices Blackfin      /

   d8"         'Y88b        /___________________________________/

  :8P    '      :888

   8a.   :     _a88P         For further information, check out:

 ._/"Yaa_:   .| 88P|            - http://blackfin.uclinux.org/

 /    YP"    `| 8P  `.          - http://docs.blackfin.uclinux.org/

 /     /.___.d|    .'           - http://www.uclinux.org/

 `--..__)8888P`._.'  jgs/a:f    - http://www.analog.com/blackfin

 

Have a lot of fun...

 

 

BusyBox v1.4.1 (2009-01-10 22:19:59 CST) Built-in shell (msh)

Enter 'help' for a list of built-in commands.

 

root:/> cat /proc/cpuinfo

 

Board Name:   ADDS-BF561-EZKIT

Board Memory:      64 MB

Kernel Memory:     64 MB

MMU:            none

FPU:              none

System Clock: 99000000 Hz

 

CPU0:            ADSP-BF561 Rev. 0.0

Core Clock:            0 Hz

BogoMips:      0.00

Calibration:     0 loops

I-CACHE:       OFF

D-CACHE:      OFF

DBANK-A:     CACHE

DBANK-B:      CACHE

I-CACHE Size:       16KB

D-CACHE Size:      32KB

I-CACHE Setup:     4 Sub-banks/4 Ways, 32 Lines/Way

D-CACHE Setup:    2 Super-banks/4 Sub-banks/2 Ways, 64 Lines/Way

 

CPU1:            ADSP-BF561 Rev. 0.3

Core Clock:    594000000 Hz

BogoMips:      1175.55

Calibration:     587776000 loops

I-CACHE:       ON

D-CACHE:      ON

DBANK-A:     CACHE

DBANK-B:      CACHE

I-CACHE Size:       16KB

D-CACHE Size:      32KB

I-CACHE Setup:     4 Sub-banks/4 Ways, 32 Lines/Way

D-CACHE Setup:    2 Super-banks/4 Sub-banks/2 Ways, 64 Lines/Way

root:/>

还没加驱动，不过这个应该简单了，呵呵！

整体感觉VDSP和bf561还是挺酷的，27M的L2_and_L3_common_memory.sm，uclinux.map.xml也有差不多27M，跑起来几乎没什么问题，就是下载速度变得慢了点，下载一次需要3-5分钟，不过无论如何都比用gcc toolchain编译下载要快，不是吗？

另外跑这样的大系统感觉最好有足够的内存和USB仿真器，使用了两个系统进行编译，一个是笔记本（1.6G CPU + 2G内存 + USB仿真器），另一个是台式机（sp3200 + 512M内存 + PCI仿真器），感觉用笔记本的速度要比台式机的快多了。

两个都是用的ADI的仿真器，哪天有机会搞个国产的仿真器试试，看看到底咋样，能不能经受住考验。哈哈！

 

1       参考资料

uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(70)：保留VDSP的heap(2009-02-20)

uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(71)：l1_data_sram_init的疑惑(2009-02-20)

uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(72)：中断时SP的保存(2009-2-22)

uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(73)：.init.setup(2009-02-27)

uclinux-2008R1.5-RC3(bf561)到VDSP5的移植(74)：initramfs(2009-02-27)